manualshive.com logo in svg

Miele G 7200, Operating Instructions Manual

Share
Download
Miele G 7200 Operating Instructions Manual Download Page 73

Cleaning and care

73

In order to clean the inside of the fil-
ter, pull the microfilter on the plastic
ring downwards and away from the
filter combination.

Rinse all the parts under running wa-
ter. 
If necessary, use a soft cleaning
brush to remove soiling.

Insert the microfilter back into the fil-
ter combination.

Refit the filter combination so that it
lies flat in the base of the wash cab-
inet.

Refit the lower spray arm to the filter
combination using the screw connec-
tion.

Rotate the screw connection clock-
wise until the arrow in the viewing
window points to the lock symbol 

.

Damage due to soiling entering

the circulation system.
The lower spray arm is used to se-
cure the filter combination. Without
filters, coarse soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.

Summary of Contents for G 7200





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands