manualshive.com logo in svg

Miele G 7200, Operating Instructions Manual

Share
Download
Miele G 7200 Operating Instructions Manual Download Page 64

Programme overview

64

 Further programmes

PowerWash 60 °C

Programme for cleaning a mixed load
with normal household food residues.

ExtraQuiet 55 °C

Very quiet programme with longer dura-
tion. This programme is suitable for a
mixed load with normal household food
residues that have dried on slightly.

Maintenance programme

The dishwasher wash cabinet is gener-
ally self-cleaning. However, if residues
or deposits occur, use the 

Mainten-

ance

 programme to clean it. The dish-

washer must not be loaded for this pro-
gramme. This programme is designed
for cleaning the wash cabinet using
care products (dishwasher cleaner/
dishwasher conditioner) (see “Optional
accessories” chapter, “Appliance care”
section). Follow the instructions on the
packaging. When using dishwasher
care products, detergent should not be
dispensed. For this reason, automatic
dispensing (if available) will be deactiv-
ated for this programme.

Summary of Contents for G 7200





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands