![background image](http://html.mh-extra.com/html/miele/g-698-sc/g-698-sc_operating-instructions-manual_234788039.webp)
Drying fan running time
During the drying phase, as long as the
door of the dishwasher remains closed,
moist air is expelled through the ventila-
tion outlet for the drying fan. The drying
fan running time can be increased to
avoid the risk of damage to a worktop
fitted above the dishwasher. If this op-
tion is selected, the fan will continue to
run for approx. 14 minutes after the end
of a programme.
Activating and deactivating in-
creased drying fan running time:
^
Switch the dishwasher off using the
"On/Off" button.
^
Press
&
and "Start/Stop" buttons in
and whilst doing so switch the dish-
washer on using the “On/Off” button.
Then release these buttons.
A
p
and two digits will appear in the
time display.
The "Salt" indicator light will flash and
the indicator lights will come on for the
"Normal 50°" and "Energy save"
programmes.
If this is not the case the process must
be repeated.
^
Press the button for the "Energy save"
programme.
The following values will show in the
display:
–
90
: the fan running time is not in-
creased,
–
91
: the fan running time is increased
^
Press the "Top Solo" button to change
the setting.
The value in the display will change ac-
cordingly.
^
Press the "Start/Stop" button.
SP
for save will appear in the time dis-
play.
^
Press the "Start/Stop" button again.
The fan running time change is now
stored in memory.
All the programme button indicator
lights will light up and the "Start/Stop"
indicator light will flash.
^
Switch the dishwasher off using the
"On/Off" button.
Operation
39
Summary of Contents for G 698 SC
Page 62: ...Cutlery tray Comparison tests 62 ...
Page 64: ...Cutlery tray Comparison tests 64 ...
Page 71: ...71 ...