Switching on
^
Make sure the spray arms are not ob-
structed.
^
Close the door.
^
Open the stopcock, if it is closed.
^
Press the "On/Off" button (15).
All the programme button indicator
lights (16) will light up and the
“Start/Stop” indicator light will flash.
Start the programme
^
To help you choose the right
programme, please read the
programme chart at the end of these
operating instructions.
^
Press button (16) for the programme
you want.
All indicator lights next to the
programme buttons, except the one for
the programme selected, go out.
The "Start/Stop" indicator light will start
flashing.
The running time of the programme se-
lected appears in the time display (18)
in hours and minutes.
The “Time Left” indicator light comes
on.
Note:
The additonal functions "Delay start" or
"Top Solo" can now be selected if
wished (see "Additional functions ").
^
Press the “Start/Stop” button (21).
The “Start/Stop” indicator light will
come on. The programme cycle be-
gins.
Do not finish a programme prema-
turely. Important programme stages
(e.g. reactivating the water softener)
could be omitted.
Glass care indicator light (14)
The green Glass care indicator light will
come on when you select a programme
that is suitable for glassware.
It will stay on for the duration of the
programme and go out at the end of
the programme.
Operation
32
Summary of Contents for G 698 SC
Page 62: ...Cutlery tray Comparison tests 62 ...
Page 64: ...Cutlery tray Comparison tests 64 ...
Page 71: ...71 ...