Miele G 6910 Operating Instructions Manual Download

Page: 39 / 96

Loading the dishwasher

Grates and filters

You can also wash Miele grates, the

Miele griddle plate, and Miele range

hood filters.



Select the

Grates & Filters

program for

optimum dishwashing results.



Protruding parts can damage the

dishwasher.
Load the dishwasher in such a way

that no corners protrude over the

side of the basket.



Heavy and sharp wash loads can

damage the coating of the basket

struts.
Load grates, griddle plates, and fil‐

ters carefully.



Only place dishwasher safe

Miele grates, filters and gill plates in

the dishwasher.

Grates



Rust damages the dishwasher.

Wash only grates that are undam‐

aged and not rusty.



Place the upper basket in the top po‐

sition.



Load the grate in the bottom basket.

To do so, remove the MultiComfort

insert and fold over the front row of

spikes.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands