Problem
Possible cause
Remedy
The indicator light
“Inlet/Outlet” is flashing
and the programme
does not continue
Before rectifying the
problem you must:
–
Turn the programme
selector to the “Stop”
position.
–
Switch the dishwasher
off using the “On/Off”
button.
Water intake is restricted.
–
Open the stopcock fully.
–
Check the water inlet
filter and clean if
necessary, see
“Cleaning the water
inlet filter”.
Water outlet is restricted,
water remains in the
wash cabinet at the end
of a programme.
–
Clean the filter
combination, see
“Cleaning and Care”.
–
Clean the drain pump,
see “Cleaning the
drain pump and non-
return valve”.
–
Clean the non-return
valve, see “Cleaning
the drain pump and
non-return valve”.
–
Remove any kink in the
drain hose.
Knocking noise
in the wash cabinet
The spray arm is
knocking against an item
in the basket.
Interrupt the programme,
rearrange items which are
obstructing the spray arms.
Rattling noise
Items of crockery are
insecure in the wash
cabinet.
Interrupt the programme,
rearrange the items of
crockery.
A whistling noise is
heard during the pro-
gramme
The axial face seal of the
circulation pump
sometimes makes a
whistling noise. This may
be caused by detergent.
This is not a problem. Try
out other detergents.
Consult the Miele Service
Department if the noise is
permanent.
Problem solving guide
49
