![background image](http://html.mh-extra.com/html/miele/g-6620/g-6620_operating-instructions-manual_234754081.webp)
Plumbing
81
The Miele waterproof anti-leak
system
Provided your dishwasher has been in-
stalled correctly, the Miele WaterProof
System will protect you from water
damage throughout its lifetime.
Connection to the water supply
Water in the dishwasher must
not be used as drinking water.
– The dishwasher may be connected to
a cold or hot water supply, max.
60 °C.
We would only recommend connec-
tion to a hot water supply if it is eco-
nomical, e.g. a solar powered supply.
When connected to a hot water sup-
ply all programme stages which
would otherwise be carried out with
cold water will be carried out with hot
water.
– The inlet hose is approx. 1.5 m long.
A 1.5 m long flexible metal extension
hose (pressure tested to 14000
kPa/140 bar) is available as an op-
tional accessory, if required.
– A stopcock with a 3/4" male thread
must be provided on site.
– This appliance is constructed to
comply with IEC/EN/DIN 61770 //
VDE 0700 Section 600, and may be
connected to a suitable supply
without an extra non-return valve if
national regulations permit.
– The water pressure (flow pressure at
the take-off point) must be between
50 and 1000 kPa (0.5 and 10 bar). If
the water pressure is too high, a
pressure reducer valve must be fitted.
After connecting the dishwasher to
the water supply, check that all
plumbing connections are watertight.
To avoid any damage to the ap-
pliance, the dishwasher must only be
operated when it is connected to a
fully vented plumbing system.
The inlet hose must not be
shortened or damaged in any way as
it contains electrical components
(see illustration).
Summary of Contents for G 6620
