Miele G 651 Plus Operating Instructions Manual Download Page 50

Page: 50 / 72

Problem

Possible cause

Remedy

The indicator light "In-
let/Drain" is flashing and
the programme does not
continue.

Before rectifying the prob-
lem you must:

–

Turn the programme
selector to the "Stop"
position.

–

Switch the dishwasher
off using the "On/Off"
button.

Water intake is restricted.

–

Open the stopcock
fully.

–

Check the water inlet
filter and clean if nec-
essary, see "Cleaning
the water inlet filter".

–

The water pressure at
the intake is lower than
0.3 bar. Seek profes-
sional advice.

Water outlet is restricted,
water remains in the wash
cabinet at the end of a
programme.

–

Clean the filter combi-
nation, see "Cleaning
and Care".

–

Clean the drain pump,
see "Cleaning the drain
pump and non-return
valve".

–

Clean the non-return
valve, see "Cleaning
the drain pump and
non-return valve".

–

Remove any kink in the
drain hose.

Problem solving guide

Summary of Contents for G 651 Plus









































































Search results

Summary of Contents for G 651 Plus

Reviews:

Related manuals for G 651 Plus

Brands by name

Popular brands

Miele G 651 Plus, Operating Instructions Manual

Search results

Summary of Contents for G 651 Plus

Reviews:

Related manuals for G 651 Plus

Brands by name

Popular brands