9. Adjust the door springs
^
Open the dishwasher door halfway.
If the door remains in this position when
released, the springs are adjusted
correctly.
If the door drops, the tension on the
springs needs to be increased.
If it closes on its own, the tension on the
springs need to be decreased.
^
To adjust the door springs use a T20
Torx or a small slotted screwdriver
and turn the screw located behind
the door in the upper front strip, on
the left hand side of the dishwasher.
Do not use a power screwdriver.
– turn clockwise to increase
the tension
– turn counterclockwise to
decrease the tension.
Note:
If the door springs can not be adjusted
enough (the door falls), the custom
door panel is too heavy.
Call your Miele dealer or the Technical
Service Department for advice on
stronger door springs.
Installation
25
