![background image](http://html.mh-extra.com/html/miele/g-6260/g-6260_operating-instructions-manual_234731070.webp)
Problem solving guide
70
Water inlet fault
Problem
Cause and remedy
The In-operation indica‐
tor is flashing quickly.
The buzzer is sounding.
The
Inlet/Drain
indica‐
tor is flashing on and
off.
The stopcock is closed.
Open the stopcock fully.
The In-operation indica‐
tor is flashing quickly.
The buzzer is sounding.
The
Inlet/Drain
indica‐
tor is flashing and fault
code
or
has ap‐
peared in the display.
Before rectifying the problem:
Switch the dishwasher off with the
button.
The water intake is restricted.
Open the stopcock fully and start the programme
again.
Clean the water inlet filter (see "Maintenance").
The water pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.