^
Press the "Start" button.
The "Start" indicator light will come on.
^
Turn the programme selector to the
"Stop" position.
^
Switch the dishwasher off.
The programmed water hardness level
is now stored in memory.
Checking the programmed water
hardness level
^
Switch the dishwasher off.
^
Turn the programme selector to the
"Stop" position.
^
Press the "Start" button in and whilst
holding it in switch the dishwasher on
using the "On/Off" button. Release the
"Start" button within two seconds.
The "Salt" indicator light will start flash-
ing
Important:
If a different indicator light comes on or
flashes, the process must be repeated.
Exception:
The "Rinse aid" indicator light will come
on if you have not yet added rinse aid
or if rinse aid needs replenishing.
^
Turn the progamme selector from the
"1 o’clock" position as far as the "8
o’clock" position until the "Start" indi-
cator light comes on.
When the programme selector is at the
position which corresponds to the water
hardness setting already programmed,
the "Start" indicator light will come on
(see chart "Programming and setting
the water hardness level").
^
Turn the programme selector to the
"Stop" position.
^
Switch the dishwasher off.
Before using for the first time
16
