![background image](http://html.mh-extra.com/html/miele/g-5210/g-5210_operating-instructions-manual_234693083.webp)
Problem solving guide
83
Water intake fault
Problem
Possible cause and remedy
The
/
indicator
light flashes on and off.
and
appear
alternately in the time
display.
The tap is turned off.
Turn on the tap fully.
The dishwasher stops
during a programme.
The
/
indicator
light is flashing.
The fault number
or
appears in the
display.
Before rectifying the problem, you must:
Switch the dishwasher off with the
button.
Water intake is restricted.
Turn on the tap fully and start the programme
again.
Clean the filter in the water inlet (see “Cleaning
and care – Cleaning the water inlet filter”).
The water connection pressure is lower than
50 kPa.
Seek professional advice.
The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Installation – Drainage”).
The dishwasher stops
during a programme.
The warning buzzer is
sounding.
Fault number
8
appears in the time
display.
A technical fault has occurred.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
Summary of Contents for G 5210
