Miele G 5210 Operating Instructions Manual Download Page 64

Page: 64 / 100

Programme options



Express

The



Express

programme option

reduces the programme duration.

In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.

The time by which the programme
duration is shortened varies according
to the selected programme.

Selecting the



Express

programme

option may take precedence over other
selected options.

When used in combination with the

QuickPowerWash

programme, the



Express

option results in a rinse

cycle designed solely for the purpose
of flushing out the cabinet to remove
salt solution that leaked out after
refilling the salt reservoir.



Switch the dishwasher on with the



button.

The

Start

indicator light will flash.



Select a different programme if
required.



Press the



Express

button.

The



Express

indicator light will come

on if the programme option is available
for the programme selected.



Press the

Start

button to start the

programme.

The selected programme option will
remain active for that particular
programme until the selection is
changed.

Summary of Contents for G 5210





































































































Search results

Summary of Contents for G 5210

Reviews:

Related manuals for G 5210

Brands by name

Popular brands

Miele G 5210, Operating Instructions Manual

Search results

Summary of Contents for G 5210

Reviews:

Related manuals for G 5210

Brands by name

Popular brands