background image

Installation

*INSTALLATION*

72

Water intake

Danger to health due to wash

water.
Water in the dishwasher must not be
used as drinking water.
Do not drink any water from the dish-
washer.

Health risk and risk of damage

due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking wa-
ter specification of the country in
which the dishwasher is being oper-
ated.
Connect the dishwasher to a drinking
water supply.

The dishwasher may be connected to
cold or hot water (up to max.
140°F/60°C) supplies.
We recommend connecting to a cold
water supply to reduce energy con-
sumption. 
If energy-saving water heating sources,
such as solar energy circulation sys-
tems, are used, we recommend con-
necting to the hot water. This saves
both time and electrical energy costs.
Hot water is used in all programs.

The intake hose is approx. 5 ft (1.5 m)
long. A 5 ft (1.5 m) long, flexible metal
extension hose (tested to 2030
psi/14,000 kPa) is available as an op-
tional accessory from Miele specialist
retailers or Miele Customer Service.

Summary of Contents for G 5006 SCU XXL Active





















































































Reviews: