Miele G 5006 SCU XXL Active Operating Instructions Manual Download Page 62

Page: 62 / 84

Frequently Asked Questions

Water intake fault

Problem

Possible cause and solution

The





indicator

light flashes on and off.



and

173

appear alter-

nately on the time dis-
play.

The water supply is turned off.



Open the water-supply faucet all the way.

The dishwasher stops
during a program.
The





indicator

light is flashing.
The fault number





appears in the dis-

play.

Before remedying the fault:



Turn the dishwasher off with the



button.

Water-intake fault.



Open the water-supply faucet all the way and start
the program again.



Clean the water-intake filter (see “Cleaning the wa-
ter-intake filter” under “Cleaning and care”).



The water-connection pressure is lower than 7.25
psi (50 kPa).
Seek professional advice.



The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Water drainage” under “Installa-
tion”).

The dishwasher stops
during a program.
Fault number

8

ap-

pears in the time dis-
play.

A technical fault has occurred.



Turn off the dishwasher.



Turn off the water-supply faucet.



Contact Miele Customer Service.

Summary of Contents for G 5006 SCU XXL Active





















































































Search results

Summary of Contents for G 5006 SCU XXL Active

Reviews:

Related manuals for G 5006 SCU XXL Active

Brands by name

Popular brands

Miele G 5006 SCU XXL Active, Operating Instructions Manual

Search results

Summary of Contents for G 5006 SCU XXL Active

Reviews:

Related manuals for G 5006 SCU XXL Active

Brands by name

Popular brands