Programme options
61
Adjust Sensor wash
You can adjust the
Sensor wash
pro‐
gramme so that it will remove stubborn
soiling in a lightly soiled load.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in and,
whilst holding it in
, switch
the dishwasher on using the
but‐
ton.
Keep the programme selector button
pressed in for at least 4 seconds
until the lower right-hand programme
indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the
button five times.
The
indicator light will flash rapidly 5
times at intervals.
The flashing sequence in the display in‐
dicates whether "Adjust sensor wash"
is activated or not.
–
: "Adjust sensor wash" is switched
on.
–
: "Adjust sensor wash" is switch‐
ed off.
Press the programme selector button
if you wish to change the setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Summary of Contents for G 4960
