Miele G 4170 SCVI, Operating Instructions Manual

Page: 35 / 64

Factory default setting
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:
^
Open the door.
^
Switch the dishwasher off with the Off
button
V
.
^
Press the programme selector button
;?
in, and whilst holding it in
switch the dishwasher on using the
On button
U
.
Keep the programme selector button
;?
pressed in until the lower right
hand programme indicator comes
on.
If this does not happen, start the
procedure from the beginning again.
^
Press the programme selector button
;?
12 times briefly.
The Inlet/drain check light
2
/
2
will
give one long flash and two brief
flashes at intervals.
The upper right hand indicator shows
what the current setting is.
– If the upper right hand indicator is
flashing:
All settings are factory default
settings.
– If the upper right hand indicator is
not lit up:
At least one setting has been altered
from the factory default setting.
^
If you want to reset the factory default
settings, press the programme
selector button
;?
for at least one
second until the Inlet/drain check
light
2
/
2
comes on.
^
Press the programme selector button
;?
briefly.
The setting is now stored in memory.
^
Switch the dishwasher off with the Off
button
V
.
Operation
35