Drying fan running time
During drying and for 4 mintures after
the end of a programme air passes
through the ventilation outlet for the
drying fan. To avoid the risk of this
damp air condensing on furniture fronts
above the dishwasher it is possible to
extend the running time of the drying
fan at the end of the programme from 4
minutes to 45 minutes.
To change the drying fan running
time:
Switch the appliance off with the
“On/Off” button.
Turn the programme selector to the
“Stop” position”.
Press the “Start” button in and whilst
doing so at the same time switch the
dishwasher on using the “On/Off”
button. Release the “Start” button
again within two seconds.
The “Salt” indicator light will start flash-
ing.
Note:
If a different indicator light is on or flash-
ing, the process must be repeated.
Exception:
The “Rinse aid” indicator light will come
on if you have not yet added rinse aid or
if rinse aid needs replenishing.
Turn the programme selector to the
“Pre-wash” position.
– If the “Start” indicator light does not
come on: the fan running time is set
to 4 minutes,
– If the “Start” indicator light comes on:
the fan running time is set to 45
minutes.
Press the “Start” button to change
the setting.
Depending on the previous setting the
“Start” indicator light will either come
on or go out.
Turn the programme selector to the
“Stop” position.
Switch the appliance off with the
“On/Off” button.
The change is now stored in memory.
Operating the dishwasher
37
