Miele G 1672 Operating Instructions Manual Download Page 72

Page: 72 / 84

Settings menu

for changing standard settings

To open the Settings

menu

Switch the dishwasher on with the On button

, if it is

switched off.

The main menu will appear in the display.
If the memory function is activated, the programme menu for
the programme last selected will be displayed instead (see
"Memory"). If this is the case, press the

button to switch to

the main menu.

}

Settings

Main menu

}

Sensor wash

Select the

Settings

option.

The display will change to show the Settings

menu.

}

Language

Settings

}

Time

Select the option you want to change.

Press the

button to call up more information about the

programme currently selected.

Sub-menu options which have already been set will have a
tick

(

beside them.

Settings menu

Summary of Contents for G 1672





















































































Search results

Summary of Contents for G 1672

Reviews:

Related manuals for G 1672

Brands by name

Popular brands

Miele G 1672, Operating Instructions Manual

Search results

Summary of Contents for G 1672

Reviews:

Related manuals for G 1672

Brands by name

Popular brands