![background image](http://html.mh-extra.com/html/miele/g-1162-scvi/g-1162-scvi_operating-instructions-manual_234597015.webp)
To programme the water hardness
level
Each time a button is pressed, one of
the indicator lights will flash and light
up in the control panel. However, only
the indicator lights mentioned in the
following programming process stages
are significant.
The programming procedure can be
cancelled at any time by pressing the
Off button
V
. The procedure can
then be re-started from the beginning
again.
^
Switch the dishwasher off with the Off
button
V
.
^
Press the programme selector button
in, and
whilst holding it in
switch
the dishwasher on using the On
button
U
.
Keep the programme selector button
pressed in until the lower right hand
programme indicator comes on.
If this does not happen, start the
procedure from the beginning again.
^
Press the programme selector button
twice briefly.
The "Inlet/Drain" indicator light will flash
twice briefly at intervals, and the upper
right hand programme indicator will
flash 4 times briefly at intervals (factory
setting).
^
Press the programme selector button
for at least one second until the
"Inlet/Drain" light comes on.
The number of times the upper right
hand programme indicator flashes tells
you the water hardness level which has
been set (see chart).
°d
mmol/l
°f
Indicator
flash
frequency
1 - 4
0.2 - 0.7
2-
7
Once briefly
5 - 7
0.9 - 1.3
9- 13
Twice briefly
8 - 11
1.4 - 2.0
14- 20
3 times briefly
12 - 15
2.2 - 2.7
22- 27 4 times briefly
16 - 20
2.9 - 3.6
29- 36
5 times briefly
21 - 25
3.8 - 4.5
38- 45
6 times briefly
26 - 30
4.7 - 5.4
47- 54
7 times briefly
31 - 36
5.6 - 6.5
56- 65
8 times briefly
37 - 45
6.7 - 8.1
67- 81
9 times briefly
46 - 70
8.3 - 12.6
83-126 Once for longer
^
Press the programme selector button
briefly to select the number of flashes
which equates to your water
hardness level.
Each press of the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
Example:
If your water hardness level is
4.0 mmol/l (22 °d), the upper right
hand programme indicator should
flash briefly six times at intervals.
^
Switch the dishwasher off with the Off
button
V
.
Before using for the first time
15
Summary of Contents for G 1162 SCVi
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved G1162 0410 M Nr 07 502 100 01 ...