Installation
47
Climate range
The appliance is designed for use within
a certain climate range (ambient tem-
perature) and should not be used out-
side this range.
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the temperature
inside the appliance to rise with the risk
of food deteriorating and going off.
The climate range is stated on the data
plate inside the appliance.
Climate range
Ambient room
temperature
SN
+10 to +32 °C
N
+16 to +32 °C
ST
+16 to +38 °C
T
+16 to +43 °C
A freezer from the SN climate range
can operate without any difficulties in
rooms with a cooler ambient temper-
ature (down to +5 °C).
Ventilation
Air at the back of the appliance gets
warm.
To ensure efficient ventilation the
ventilation gaps must not be covered
or blocked in any way. They should
be dusted on a regular basis.
Fitting wall spacers supplied
The wall spacers supplied must be
used in order to achieve declared en-
ergy consumption values and to pre-
vent the build-up of condensation at
high ambient temperatures. Appliance
depth is increased by approx. 35 mm
with the wall spacers fitted. If the wall
spacers are not used the functionality
of the appliance is not affected. En-
ergy consumption is only slightly in-
creased with less distance between
the appliance and the wall.
Fit the wall spacers onto the back of
the appliance on the top left and
right.
Summary of Contents for FN 22062 ws
Page 57: ......
Page 58: ......
Page 60: ...M Nr 10 698 510 00 en GB FN 22062 ws FN 24062 ws FN 26062 ws FN 28062 ws ...
