What to do if ...
41
Display warnings
Message
Cause and remedy
The
symbol lights up
in the display, the appli-
ance does not get cold,
although the appliance
controls are working.
Demo mode
is activated. This allows the appliance to
be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
Contact Miele Service for instructions on how to
switch Demo mode off.
is lit up in the display
and the appliance can-
not be used.
The
safety lock
has been activated.
Deactivate the safety lock temporarily or switch it
off completely (see "Selecting settings - Activating
or deactivating the safety lock").
The buzzer is sounding
and the
symbol and
the temperature display
are flashing.
The
temperature alarm
has been activated (see
"Temperature and door alarm"). The temperature in
the freezer section is too warm or too cold.
This could be due to, for example:
– the appliance door being opened too often, or be-
ing left open.
– a large quantity of fresh food being placed in the
freezer at once without switching on the Super
freeze function.
– a lengthy interruption of the power supply.
Rectify the cause of the alarm.
will go out.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
A buzzer is sounding.
The
door alarm
has been activated.
Close the appliance door. The buzzer will stop.
The
symbol and the
temperature display are
flashing.
This indicates an
appliance fault
:
Call Service.
Summary of Contents for FN 22062 ws
Page 57: ......
Page 58: ......
Page 60: ...M Nr 10 698 510 00 en GB FN 22062 ws FN 24062 ws FN 26062 ws FN 28062 ws ...
