Changing over the door
^
Close the appliance door.
^
Remove cover
a
by sliding it
forwards from the back and then
lifting it off.
^
Remove cover
b
by pulling it
upwards.
Caution! The appliance door is not
secure once the hinge plate has
been removed.
^
Loosen screws
d
in upper hinge
plate
c
and pull it upwards and off.
^
Carefully lift the door off and place it
to one side.
^
Carefully release cover
e
from
above using a screwdriver and then
take it off together with retaining plate
f
.
^
Then separate retaining plate
f
from
cover
e
, by pushing it slightly to the
left. Then pull the cover forwards and
off.
^
Rotate retaining plate
f
by 180°.
^
Then fit cover
e
from the front over
retaining plate
f
, and slide it over to
the right. The writing must be visible.
^
Remove cover
g
, then rotate it by
180° and fit it on the opposite side.
^
Then fit cover
e
together with
retaining plate
f
on the opposite
side.
^
Remove cap
h
from the bearing
bush in the door and refit on the
opposite side.
^
Remove clamp
i
from underneath
the door and fit it on the opposite
side.
Changing the door hinging
39
Summary of Contents for FN 12827 S ed
