Installation
46
Installing the appliance
Two people are required for in-
stalling the appliance.
The appliance must be empty
before it is moved.
Do not under any circumstances
remove
the pouches (depending on
model) located between the back of
the appliance and the metal grille
(heat exchanger). These are important
for the correct functioning of the ap-
pliance. Their contents are non-toxic
and are not dangerous.
Release the mains cable from the
back of the appliance.
Remove the cable clip from the back
of the appliance.
Carefully push the appliance into po-
sition.
Position the appliance with the wall
spacers (if fitted) or the back of the
appliance against the wall.
Aligning the appliance
To align the appliance, adjust the
front feet using the spanner supplied
Summary of Contents for F 12016 S-2
Page 52: ......
Page 53: ......
Page 54: ......
Page 56: ...M Nr 09 552 580 02 en GB F 12016 S 2 F 12020 S 2 F 12020 S 3 ...