manualshive.com logo in svg

Miele F 12016 S-2, Operating And Installation Instructions

Share
Download
Miele F 12016 S-2 Operating And Installation Instructions Download Page 3

Contents

3

Clean the compressor and metal grille at the back of the appliance....................  34
After cleaning ........................................................................................................  34

Problem solving guide

........................................................................................  35

Noises

...................................................................................................................  41

After sales service

...............................................................................................  42

Contact in case of malfunction .............................................................................  42
Warranty ................................................................................................................  42

Electrical connection

..........................................................................................  43

Installation

............................................................................................................  44

Side-by-side combinations ...................................................................................  44
Location.................................................................................................................  44
Ventilation ..............................................................................................................  45
Appliances supplied with wall spacers .................................................................  45
Installing the appliance..........................................................................................  46
Building the appliance into a kitchen run ..............................................................  47
Appliance dimensions ...........................................................................................  48

Changing the door hinging

.................................................................................  49

Changing over the door handle.............................................................................  50

Summary of Contents for F 12016 S-2

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands