manualshive.com logo in svg

Miele F 12011 S-1, Operating And Installation Instructions

Share
Download
Miele F 12011 S-1 Operating And Installation Instructions Download Page 24

Selecting further settings

24

The lock symbol 

 will light up as well

as the -18 °C field in the temperature
display.

Press the Super freeze button briefly
to deactivate the lock.

The lock symbol 

 will start flashing

and the -18 °C field in the temperature
display will go out.

Press the On/Off button to exit Set-
tings mode,

or

wait for 5 minutes.

The menu symbol goes out and the
temperature display shows the required
temperature. The lock symbol 

 goes

out.

Altering the display brightness

The display brightness can be adjusted
to suit lighting conditions in the room.

The display brightness can be set to
one of 5 different settings. It is set to
level 1 ex-works.

Press the Super freeze button for ap-
prox. 5 seconds.

The Menu symbol 

 will light up

and the lock symbol 

 will start flash-

ing to show that settings mode is now
activated.

Press the button for setting the tem-
perature to access the display bright-
ness function.

The lock symbol 

 go out and the dis-

play brightness symbol 

 will start

flashing.

Press the Super freeze button briefly
to confirm your choice.

The display brightness symbol  will light
up.

 will light up.

Summary of Contents for F 12011 S-1





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands