background image

,

Repairs should only be carried out by a qualified and trained person in

accordance with local and national safety regulations. Unauthorized repairs
could cause an injury or machine damage. Some minor problems can be fixed
without a service call.

What if the drawer does not heat?

Possible fault

Fix

There is no power to the warming
drawer.

Insert the plug into the outlet.

The circuit breaker has tripped.

Reset the circuit breaker.

The timer is set to "0" or a temperature
was not selected.

Turn the timer to a time and/or
temperature setting.

What if the food is not warm enough?

Possible fault

Fix

Adjust the temperature setting. Check that the vents have not been blocked by
large plates or dishes.

What if the food or dishes are too hot?

Check the the temperature setting and make sure the food is not too close to the
heating element.

What if the food is extremely dry or moist?

Adjust the humidity control setting.

What if the dishes are not warm enough?

Possible fault

Fix

The wrong temperature was selected.

Check the temperature setting.

The vents were blocked by dishes.

Reload the dishes.

The dishes need more time to warm.

Increase the timer setting.

Why is a noise is heard during use?

This is not a fault. This is the circulation fan which distributes the heated air. The
fan should shut off automatically after 30 minutes of turning the drawer on.

Frequently asked questions

18

Summary of Contents for ESW 760-25 MasterChef

































Reviews: