Miele EGW 3060-10 Operating And Installation Instructions Download Page 25

Page: 25 / 28

In the event of any faults which you cannot remedy yourself, or if the appliance is
under guarantee, please contact:

– your Miele Dealer

– the Miele Customer Contact Centre (see back cover for address).

Please note that telephone calls may be monitored and recorded to improve
our service.

When contacting Miele, please quote the model and serial number of your
appliance, which are given on the data plate.

N.B. A call-out charge will be applied for unnecessary service visits where the
problem could have been resolved as described in these instructions.

Space in which to stick the extra data plate supplied with the appliance. Ensure
that the model number is the same as the one on the front of these instructions.

After sales service, data plate

Summary of Contents for EGW 3060-10





























Search results

Summary of Contents for EGW 3060-10

Reviews:

Related manuals for EGW 3060-10

Brands by name

Popular brands

Miele EGW 3060-10, Operating And Installation Instructions

Search results

Summary of Contents for EGW 3060-10

Reviews:

Related manuals for EGW 3060-10

Brands by name

Popular brands