~
Before connecting the appliance to the mains supply
make sure that the connection data on the data plate (voltage
and connected load) correspond with the mains electricity
supply,
This data must correspond in order to avoid the risk of
damage to the appliance. Consult a qualified electrician if in
any doubt.
~
The socket and on-off switch should be easily accessible
after the appliance has been built in.
~
The plate warmer may only be built in in combination with
those appliances quoted by the manufacturer as being
suitable. The manufacturer cannot guarantee trouble-free
operation if the appliance is operated in combination with
appliances other than those quoted by the manufacturer as
being suitable.
~
When building in the plate warmer in combination with
another suitable appliance, the plate warmer must be fitted
above a fixed interim shelf in the housing unit to ensure that
the housing unit can suport both its weight and that of the
other appliance.
~
As the combination appliance is placed directly on top of
the plate warmer once it is built in, an interim shelf is not
necessary between the two appliances.
~
When building in the combination appliance, it is essential
to follow the instructions given in the operating and
installation instructions supplied with the combination
appliance.
~
This appliance may only be installed in mobile installations
such as ships, caravans, aircraft etc. if a risk assessment of
the installation has been carried out by a suitably qualified
engineer.
All dimensions in this instruction booklet are given in mm.
Safety instructions for installation
19
Summary of Contents for EGW 3060-10
Page 27: ...27 ...
Page 28: ...Alteration rights reserved 0508 M Nr 07 241 630 01 ...
