Water inlet/drain fault
Problem
Possible cause
Remedy
The buzzer sounds.
The following fault
message appears in
the display:
Water inlet fault
Please open the
stopcock.
The stopcock is closed. Open the stopcock fully.
Water inlet fault 12/F13
Before rectifying the problem,
you must:
– Switch the dishwasher off
with the
K
sensor.
Water intake is
restricted.
– Open the stopcock fully and
start the programme again.
– Clean the water inlet filter
(see "Maintenance").
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
Problem solving guide
56
Summary of Contents for Dishwasher
Page 89: ...89 ...
Page 90: ...90 ...
Page 91: ...91 ...
Page 92: ...Alteration rights reserved G5930 G5935 1112 M Nr 09 255 920 00 ...