Operation
45
Cleaning the steam oven
If necessary, remove the condensate
tray from the oven compartment and
empty it.
Risk of injury caused by hot wa-
ter.
At the end of a cooking programme,
hot water left in the steam generator
is pumped back into the water con-
tainer.
Take care not to tip the water con-
tainer when taking it out of the appli-
ance.
Remove the water container.
Remove the spill guard and empty
the water container.
After each use, clean and dry the
whole appliance as described in
“Cleaning and care”.
Make sure the spill guard engages
correctly when installing it.
Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the con-
tainer with fresh water.
Take out the water container and re-
plenish the water.
Push the water container into the ap-
pliance.
The cooking programme is resumed.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
–
Temperature
–
Duration
–
Finish at
–
Start at
