Before using for the first time
20
Start the WPS connection on your
Wi-Fi router.
When successfully connected
2
and
3
will light up constantly.
Quit connection mode on the
rangehood by touching the run-on
control
.
The rangehood can now be operated
via the App.
If the connection fails, you have
probably not connected WPS on your
router quickly enough. Repeat the steps
above.
Useful tip:
If your Wi-Fi router does not
support WPS, please connect via the
Miele App.
Signing out of Wi-Fi (reset to factory
settings)
To set up a new Wi-Fi connection, the
existing Wi-Fi connection must first be
disconnected.
Touch the On/Off sensor
.
All symbols light up with reduced
brightness.
Press and hold the run-on option
control
until the grease filter
and charcoal filter
symbols light
up.
Touch the
1
control.
With an existing Wi-Fi connection
2
and
3
will light up constantly.
The rangehood is ready for
disconnection during the next two
minutes.
Summary of Contents for DAS 8630
Page 14: ...Guide to the rangehood 14 ...
Page 49: ......
Page 50: ......
Page 52: ...M Nr 12 039 300 00 en AU NZ DAS 8630 DAS 8930 ...
