Before using for the first time
19
Touch the On/Off sensor
.
All symbols light up with reduced
brightness.
Press and hold the run-on option
control
until the grease filter
and charcoal filter
symbols light
up.
Touch the
2
control.
2
will light up constantly,
3
will flash on
and off.
The rangehood is ready for connection
during the next two minutes.
Follow the instructions in the App.
When successfully connected
2
and
3
will light up constantly.
Quit connection mode on the
rangehood by touching the run-on
control
.
The rangehood can now be operated
via the App.
Connecting via WPS
Your Wi-Fi router must support WPS
(Wi-Fi Protected Setup).
Touch the On/Off sensor
.
All symbols light up with reduced
brightness.
Press and hold the run-on option
control
until the grease filter
and charcoal filter
symbols light
up.
Touch the
2
control.
2
will light up constantly,
3
will flash on
and off.
The Wi-Fi connection must be started
on the rangehood at the same time as
on the Wi-Fi router.
Press the
B
control on the rangehood
after a few seconds.
After a short while
2
will light up
constantly, and
3
and
B
will flash on
and off.
The rangehood is ready for connection
during the next two minutes.
Summary of Contents for DAS 8630
Page 14: ...Guide to the rangehood 14 ...
Page 49: ......
Page 50: ......
Page 52: ...M Nr 12 039 300 00 en AU NZ DAS 8630 DAS 8930 ...