Miele DAD 4840, Operating And Installation Instructions, Page: 28 / 56

Operation (Manual mode)
28
- If you touch the run-on option
control  again, the fan will remain
on (

will go out).
Switching the fan off
 Touching the control for the active
power level again switches the fan
off.
The deflector plate remains extended.
Run-on in Plug&Play operation
If you switch off the fan in Plug&Play
mode, it will run on at level
1 .
Run-on ensures that the plinth is
ventilated after cooking.
Depending on the last active fan level,
run-on lasts between 2 and 30 minutes.
You can switch off the fan immediately
during run-on by pressing
1 or the On/
Off switch  .
This function is independent of the run-
on function

.
Switching on and dimming the
hob lighting
The hob lighting can be switched on
and off and dimmed independently of
the fan.

With the deflector plate retracted,
touch the On/Off switch

.
All symbols light up with reduced
brightness.
 Touch the lighting control  briefly.
The deflector plate extends.
The lighting will switch on at maximum
brightness. All 3 bars next to the
lighting control

light up.
 With the lighting switched on, press
and hold the lighting control
 . The
brightness will gradually dim until you
release the control.
 Press and hold the lighting control 
again to increase the brightness to
the level required and then release it.

Alternatively, you can select 3
brightness levels by touching the bars
next to the lighting control
 .
Switching the hob lighting off
 Touching the lighting control  again
switches the hob lighting off.
The deflector plate remains extended.