manualshive.com logo in svg

Miele DAD 4840, Operating And Installation Instructions, Page: 21 / 56

Share
Download
Miele DAD 4840 Operating And Installation Instructions Download Page 21

Before using for the first time

21

Sign out of WiFi (reset to factory
settings)

To set up a new WiFi connection, the
existing WiFi connection must be
disconnected.

With the deflector plate retracted,
touch the On/Off switch 

.

All symbols light up with reduced
brightness.

Press and hold the run-on option
control 

 until the grease filter 

and charcoal filter 

 symbols light

up.

Touch 

1

.

The deflector plate extends.

If a WiFi connection exists, 

2

 and 

3

 will

light up constantly.

The cooker hood will be ready for
disconnection in the next 2 minutes.

Touch 

1

.

2

 will light up constantly, 

3

 will flash.

After a few seconds, 

2

 and 

3

 will flash.

The connection has now been
disconnected.

Quit signing-off mode on the cooker
hood by touching the run-on option
control 

.

The WiFi connection has now been
disconnected. A new connection can
now be set up.

Summary of Contents for DAD 4840

























































Reviews:

No comments