![background image](http://html.mh-extra.com/html/miele/da1180/da1180_operating-and-installation-instructions_235344025.webp)
^
Attach the hood to the wall anchors.
^
Tighten the two screws at the left and
the right on the back of the device.
These are used to adjust the tilt and
secure the hood in position.
^
Reinstall the overhead lights.
^
Put the grease filter back in place.
^
If extraction mode is used, install the
exhaust ducting and connections.
For air extraction mode:
^
For an
C
6" (150 mm) exhaust duct,
use a pointed knife to cut off the
exhaust collar where it tapers.
For an
C
5" (125 mm) exhaust duct,
use the collar as is.
^
If required, insert the non-return flap.
Ensure that the flap opens easily and
closes by itself.
Installation
25
Summary of Contents for DA1180
Page 8: ...Guide to the ventilation system 8 ...
Page 16: ...16 ...