manualshive.com logo in svg

Miele DA 5330 D, Operating And Installation Instructions

Share
Download
Miele DA 5330 D Operating And Installation Instructions Download Page 9

Safety regulations prohibit the
fitting of a cooker hood over solid

fuel stoves.

All ducting, pipework and fittings
must be of non-flammable material.

These can be obtained from the Miele
Spare Parts department or from
builders' merchants.

The appliance must not be
connected to a chimney or vent

flue which is in use. Neither should it be
connected to ducting which ventilates
rooms with fireplaces.

If exhaust air is to be extracted into
a chimney or ventilation duct no

longer used for other purposes, seek
professional advice.

Accessories

Accessory parts may only be fitted
when expressly approved by Miele.

If other parts are used, guarantee,
performance and product liability
claims may be invalidated.

Disposal of your old appliance

Before disposing of an old
appliance, first make it unusable.

This should be done by a competent
person.

The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.

Warning and Safety instructions

9

Summary of Contents for DA 5330 D

































Reviews:

No comments

Brands by name

Popular brands

Load more brands