manualshive.com logo in svg

Miele DA 5330 D, Operating And Installation Instructions

Share
Download
Miele DA 5330 D Operating And Installation Instructions Download Page 11

a

Cover plate

b

Tower

c

Canopy

d

Hob lighting

e

Controls

The two sides of the cooker hood  can
be operated independently of one
another.

f

Grease filters

g

Cover panels

Miele DDI 5330

(optional accessory)

One set contains 6 cover panels

h

Touch control for the
hob lighting

This control switches the lighting on
and off, and is also a dimmer switch.

i

On/Off touch control for the fan

j

Touch controls to select fan
power level

k

Touch control for the run-on option

To activate the run-on option. The fan
can be set to continue running, and to
switch off automatically after either 5 or
15 minutes.

l

Touch control for the
grease filters

The indicator lamp for the grease filters
lights up when the grease filters need
to be cleaned.

The touch control is used to reset the
operating hours counter every time the
grease filters are cleaned (see
"Cleaning and care").

It can also be used to check and alter
the operating hours counter.

For information about using the
appliance, see "Operation".

Guide to the appliance

11

Summary of Contents for DA 5330 D

































Reviews:

No comments

Brands by name

Popular brands

Load more brands