Miele DA 430-4, Operating And Installation Instruction

Page: 24 / 36

^
After cleaning, leave the filters to dry
for a while on an absorbent surface
before putting them back in place.
^
When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
inside of the housing to prevent the
risk of these catching fire.
To replace the grease filter
When putting the grease filter back in
position, ensure that the locking clip is
visible facing down towards the hob.
If the grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slits to
disengage the clip.
To replace the outer filter
^
Engage the outer filter on the
retaining hooks at the back, then
push in at the front and click back
into the quick-release mechanism.
^
After replacing the grease and the
outer filter, press the grease filter
control for approximately 3 seconds
to reset the operating hours counter.
The indicator lamp will go out.
If the grease filter and outer filter are
cleaned before the operating hours
counter has reached its maximum, the
grease filter touch control should be
pressed for approximately 6 seconds to
reset the counter.
Cleaning and care
24