Before any cleaning or maintenance
work is carried out, disconnect the
cooker hood from the mains supply.
Ensure that:
–
it is switched off at the isolator,
or
–
the fuse is withdrawn from the
fused spur connection unit,
or
–
the mains fuse is disconnected,
or
–
the screw-out fuse is removed
(in countries where this is
applicable).
A range of Miele branded cleaning and
conditioning agents are available to
order through your Miele Dealer /
Chartered Agent, the Miele Spare Parts
Department, or via the internet on
www.miele-shop.com.
Housing
General notes
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^
All external surfaces and controls can
be cleaned using a Miele E-Cloth, or
with warm water and a small amount
of washing-up liquid applied with a
well wrung-out soft sponge or cloth.
^
Wipe the surfaces dry using a soft
cloth.
Please observe the instructions below
for cleaning stainless steel, aluminium
and glass surfaces and the controls.
Important for appliances with
stainless steel housing
(This infomation does not apply to the
controls).
Stainless steel surfaces can be cleaned
using the Miele E-Cloth, or with a
proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents.
These will damage the surface
material.
To help prevent re-soiling, a condition-
ing agent for stainless steel can also be
used.
Follow the manufacturer's instructions
on the packaging.
Cleaning and care
20
Summary of Contents for DA 430-4
Page 12: ...Guide to the appliance 12 ...
Page 35: ...35 ...
Page 36: ...Alteration rights reserved 1209 M Nr 06 748 870 05 ...
