Before using for the first time
20
Connecting via WPS
Your WiFi router must support WPS
(WiFi Protected Setup).
Switch the cooker hood off.
Press and hold the
control.
Press the lighting control at the same
time
.
2
will light up constantly,
3
will flash on
and off.
The WiFi connection must be started on
the cooker hood at the same time as on
the WiFi router.
Press the
control on the cooker
hood after a few seconds.
After a short while the
2
will light up
constantly, and the
3
and the
B
will
flash on and off.
The cooker hood is ready for
connection in the next two minutes.
Start the WiFi connection on your
WiFi router.
When successfully connected the
2
and
3
will light up constantly.
Quit connection mode on the cooker
hood by pressing the Run-on
control
.
The cooker hood can now be operated
via the app.
If the connection fails, you have
probably not connected WPS on your
router quickly enough. Repeat the steps
above.
Tip:
If your WiFi router does not support
WPS, please connect via the
Miele@mobile app.
Summary of Contents for DA 3668
Page 14: ...Guide to the appliance 14 ...
Page 46: ...Installation 46 Appliance dimensions DA 3668 DA 3698 ...
Page 50: ...Installation 50 Assembly parts ...
Page 70: ......