Miele DA 3360, Operating Instructions Manual

Page: 29 / 36

Setting up for recirculation
mode
If site conditions are not suitable for the
cooker hood to be used with air
extraction, the appliance must be set
up for recirculation.
For this, conversion kit DUU 151
(available from your Miele dealer or the
Miele Spare Parts Department) is
required.
You will also need a charcoal filter (see
“Technical data”).
^
Fit the conversion kit as described in
the installation instructions supplied
with the kit.
^
Make sure that the slats in the
exhaust grille point towards the
centre of the room and not towards a
wall or the ceiling.
A non-return flap is not used in
recirculation mode.
^
Fit the charcoal filter (see “Cleaning
and care”).
Electrical connection
Refer to the notes in “Electrical
connection” and “Warning and
Safety instructions” before
connecting to the electricity supply.
^
Connect the appliance to the
electricity supply.
Installation
29