manualshive.com logo in svg

Miele DA 2690 EXT, Operating And Installation Instructions

Share
Download
Miele DA 2690 EXT Operating And Installation Instructions Download Page 27

Cleaning and care

27

Important for the controls

Do not leave dirt and debris on the
buttons for any length of time.
Otherwise they may become
discolored or damaged.
Remove any dirt or debris
immediately.

Observe the general cleaning
instructions contained in this chapter.

Do not use a stainless steel cleaner
to clean the control buttons.

Grease filters and edge
extraction panel

The edge extraction panel and the
reusable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapors, preventing soiling of the hood.

A dirty filter is a fire hazard!

Cleaning intervals

Grease which has collected in the
ventilation hood hardens over time and
makes cleaning more difficult. It is
therefore recommended that the edge
extraction panel and the grease filters
should be cleaned regularly (at least
every 3–4 weeks) to avoid a build-up of
grease.

Clean the edge extraction panels and
grease filter immediately if the grease
filter symbol 

 on the filter saturation

indicator lights up.

You can adjust the interval of the filter
saturation counter to match your
cooking habits (see "Operation").

Summary of Contents for DA 2690 EXT





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands