Miele DA 249-2, Operating And Installation Instructions

Page: 15 / 36

Setting/altering the active charcoal
filter operating hours counter
The active charcoal filter is needed for
recirculation mode.
The cooker hood is set at the factory for
extraction mode. On delivery the oper-
ating hours counter for the active char-
coal filter is set to unlimited.
For recirculation mode the operating
hours counter needs to be set to the re-
quired time:
^
Use the On/Off touch control to
switch the fan off.
^
Press the run-on option touch control
and the active charcoal filter touch
control at the same time.
The indicator lamp for the active char-
coal filter touch control and one of the
lamps for the
– / + touch controls will
flash.
The – / + touch control lamps show the
time which has been set:
1st lamp from left
= 120 hours
2nd lamp from left = 180 hours
3rd lamp from left = 240 hours
4th lamp from left = unlimited
^
Use the – / + touch controls to select
the desired time.
^
Confirm the procedure by pressing
the active charcoal filter touch con-
trol.
If the procedure is not confirmed
within 4 minutes of programming the
steps, the cooker hood will automati-
cally revert to the "old" data.
Operation
15