Installation
30
Refit the grease filters.
For air extraction mode
If your ducting system does not have a
non-return flap, two are supplied with
the rangehood. One for
150 mm and
one for
120 mm ducting.
For
150 mm ducting, fit the non-
return flap into the exhaust
connection.
For
120 mm ducting, fit the
reducing collar supplied onto the
exhaust connection and then fit the
appropriate non-return flap onto the
reducing collar.
Secure the exhaust ducting to the
exhaust connection, e.g. with a hose
clip (available as an optional
accessory) on flexible ducting.
See "Connection for air extraction"
for further instructions on fitting the
ducting.
Summary of Contents for DA 186
Page 14: ...Guide to the appliance 14 ...
