Miele DA 1260, Operating And Installation Instructions

Page: 34 / 44

Installation
34
 Insert the hood.

Tighten both screws on the left- and
right-hand side at the back of the
hood. This adjusts the alignment of
the hood to prevent it being lifted off
the brackets.

Install the lamp again.

Reinsert the grease filters.
Preparation for vented mode

When using

6" (150 mm) exhaust
ducting, use a sharp knife to cut the
exhaust socket to size with.
When using

5" (125 mm) exhaust
ducting, install the exhaust socket as
is.

Insert the non-return flap, if required.
Make sure the flap opens easily and
closes again by itself.