![background image](http://html.mh-extra.com/html/miele/da-1200/da-1200_operating-and-installation-instructions_236965023.webp)
Cleaning and care
23
Changing a lamp
The lamps should be replaced with a
lamp of the same type:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................................ 11427
Wattage ........................................... 3 W
ILCOS D Code...... DR-3-H-GU10-50/56
Alternatively the following lamps can be
used:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................................ 11511
Wattage ........................................... 5 W
ILCOS D Code...... DR-5-H-GU10-50/54
These lamps have a different luminosity.
Only use lamps of the same type in the
cooker hood.
These lamps are available from Miele or
from specialist retailers.
Switch off the fan and the lighting.
Remove the grease filters.
Disconnect the cooker hood from the
mains electrical supply (see “Warning
and Safety instructions”).
The lamps can get hot in use.
Allow the lamps to cool down for a
few minutes before changing them.
Loosen the halogen lamp's securing
screw a little.
Slide the screw and the lamp
downwards.
Then tighten the screw again.
Turn the lamp anti-clockwise and pull
it out.
Screw the new lamp into the socket.
Please follow the manufacturer's
safety instructions.
Slightly loosen the screw again, push
the lamp upwards, and tighten the
screw.
Replace the grease filters.
Summary of Contents for DA 1200
