Miele DA 1200, Operating And Installation Instructions

Page: 32 / 48

Installation
32
Installation under a wall unit
When selecting the installation position,
ensure that the recirculation grille at the
front of the appliance will not be
covered by the wall unit.
Cut-out for mains cable and
extraction ducting
 Cut the drilling template to size and
secure to the bottom of the wall unit.
 For extraction mode make a cut-out
of at least
 170 mm in the bottom of
the unit.
 If the mains connection cable is to be
fed through the unit, a hole will also
need to be made in the unit for it.
Securing from above

Use only the fixing points as
shown on the drilling template and
the screws supplied.
Incorrect fitting can lead to damage
to the cooker hood and could
compromise electrical safety (e.g.
electric shock).
 Use the drilling template to drill
four

5 mm fixing holes through the
bottom of the cabinet.
 Remove the drilling template.