
Grease filter
The re-usable metal filters remove solid
particles (oil, dust, etc.) from the
kitchen vapours, preventing soiling of
the cooker hood.
The DA 119 has one grease filter and
the DA 112 has two grease filters.
The grease filters should be cleaned
regularly (at least every 3-4 weeks) to
avoid a build-up of fat.
However, they should be cleaned
immediately if the grease filter touch
control light comes on.
An oversaturated filter is a fire
hazard.
^
To remove a grease filter, press the
locking clip in towards the middle of
the filter. Holding carefully, lower and
remove the filter.
Take care not to let the grease filter fall
onto the hob.
^
Clean the grease filters -
–
by hand:
with a soft nylon brush,
warm water and a little washing up
liquid.
–
in a dishwasher:
place the filters
with the short side upright in the
lower basket, ensuring the spray arm
is not obstructed. Wash on a
65° programme.
Depending on the cleaning agent
used, cleaning the grease filters in a
dishwasher can cause permanent
discolouration to the surface of the
filter.
However, this will not affect the
functioning of the grease filters in
any way.
^
After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
Cleaning and care
48
Summary of Contents for DA 112
