Cleaning and care
61
Check that the milk pipework is snug
against the housing and that the
cover can be easily attached.
Useful tip:
If necessary, turn the milk
pipework towards the back at the
connecting piece on the right-hand
side.
Attach the milk valve cover as
follows: insert the pin in the top right-
hand corner and swivel the cover
backwards until a proper fit is
achieved.
Push the left-hand bean container
and maintenance container back into
the coffee machine. Attach the
central spout’s stainless steel cover.
Close the appliance door.
Cleaning the bean containers
Risk of damage from incorrect
use and cleaning.
Immersing the bean containers in
liquids can result in malfunctions. If
they are taken apart, bits may break
off or the mechanism may no longer
work properly once they are
reassembled.
Do not disassemble the bean
containers.
Do not immerse the bean containers
in liquids, e.g., soapy water.
Coffee beans contain oils which can
deposit on the walls of the bean
containers and hinder the flow of the
beans. This is why you need to clean
the bean containers regularly with a soft
cloth.
If required, you can clean the lids of the
bean containers
by hand
with warm
water and a little dish detergent. Dry the
lids thoroughly before replacing them
on the bean containers.
Open the appliance door.
Pull the left and right-hand bean
containers out of the coffee machine.
Clean the bean container wells inside
the machine.
Useful tip:
Use a vacuum cleaner to
remove any coffee residues from the
interior.
Remove the lids and empty the bean
containers.
Summary of Contents for CVA 7370
Page 86: ......
